Met onze cookies willen we u de best mogelijke winkelervaring bieden met alles wat daarbij hoort. Hieronder vallen bijvoorbeeld passende aanbiedingen, gepersonaliseerde advertenties en het onthouden van voorkeuren. Als u dit goed vindt, ga dan eenvoudig akkoord met het gebruik van cookies voor voorkeuren, statistieken en marketing door op “Oké!” te klikken. (show all). U kunt uw toestemming op elk moment nog intrekken via de cookie-instellingen (hier).
Output 1-2 9V / 100mA, Output 3-4 9V of 12V / 200mA, Output 5-6 9V / 12V of 15VDC / 600mA, Output 07-08 september - 12 V AC / 800mA, output 9-10 9V / 12V of 15VAC / 800mA
Kortsluiting bescherming op alle uitgangen
LED's voor alle uitgangen
Temperatuurdisplay
Incl. 16 x flex-kabel (3x1030, 2x1050, 1x1050-I, 2x1080, 1x2050, 2x4050, 1x5050, 1x6050, 1x1035, 1x1022, 1x7050), Split Flex en twee Stack Flex voor 18 en 24 V, montagekit voor pedalboards
Afmetingen: 158 x 98 x 35 mm (zonder rubberen voetjes)
Note: Om te voorkomen dat evaluaties gebaseerd zijn op roddel, geruchten of heimelijke advertentie staan wij op onze website alleen evaluaties toe van daadwerkelijke gebruikers die het geevalueerde product bij ons gekocht hebben.
Na inloggen vindt u alle producten die u kunt evalueren ook onder “Product evalueren” in uw klantencentrum.
I bought this product to power all my pedals on my board.
The Cioks AC10 helps me to power all my pedals, the normal DC powered TC Electronic pedals, my BB preamp and also my main pedal the AC odd voltage powered Super Drive. I
highly recommend this unit. Sturdy and easy to use!
afwerking
0
0
Evaluatie melden
Evaluatie melden
r
Cioks AC10 Multi Power Supply
ronnyhonnyponny 22.10.2020
fantastisch apparaat voor op mijn pedalboard, supersnel en voordelig geleverd. Topproduct, Topsite!
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
SK
Enough juice for quite a few pedals
Simo K. 15.10.2014
I had been looking for a pedalboard and a power supply for a while. My initial choice narrowed down to a Pedaltrain board (PT-3 w/ soft case), and Cioks AC10 for the PSU. I had never before used Cioks, but comparisons and reviews concluded that the product in question is of high quality, and it has enough juice for a great amount of pedals. I also had an AC pedal (older Blackstar HT-series) and the AC10 seemed like a fitting choise.
When I opened the packaging and took a first look into it, the AC10 was heavier yet smaller than I had expected. The build quality is top notch, and the sturdy construction gives me an impression that this was made for serious use.
I mounted it underneath my Pedaltrain board with blind rivets, with the help of instructions Cioks provides in their website. The procedure was fairly easy, and can be done even with low mechanical skills. The power supply functions flawlessly both with the few DC pedals I have and the AC pedal, and I don't see a reason to replace it anytime soon. I've been using this for just a couple of months now, so I cannot comment on long-term reliability or such.
It isn't cheap, for sure. But if you want a quality power supply, Cioks sure can make one.
I had been looking for a pedalboard and a power supply for a while. My initial choice narrowed down to a Pedaltrain board (PT-3 w/ soft case), and Cioks AC10 for the PSU. I had never before used Cioks, but comparisons and reviews concluded that the product in question is of high quality, and it has enough juice for a great amount of pedals. I also had an AC pedal
I had been looking for a pedalboard and a power supply for a while. My initial choice narrowed down to a Pedaltrain board (PT-3 w/ soft case), and Cioks AC10 for the PSU. I had never before used Cioks, but comparisons and reviews concluded that the product in question is of high quality, and it has enough juice for a great amount of pedals. I also had an AC pedal (older Blackstar HT-series) and the AC10 seemed like a fitting choise.
When I opened the packaging and took a first look into it, the AC10 was heavier yet smaller than I had expected. The build quality is top notch, and the sturdy construction gives me an impression that this was made for serious use.
I mounted it underneath my Pedaltrain board with blind rivets, with the help of instructions Cioks provides in their website. The procedure was fairly easy, and can be done even with low mechanical skills. The power supply functions flawlessly both with the few DC pedals I have and the AC pedal, and I don't see a reason to replace it anytime soon. I've been using this for just a couple of months now, so I cannot comment on long-term reliability or such.
It isn't cheap, for sure. But if you want a quality power supply, Cioks sure can make one.
